14
Remote control setup
1. Open the cover.
2. Use two AAA size batteries.When inserting the batteries, make sure correct polarities “+”and “-”
marks on the batteries line up correctly with compartment markings.
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly
, and as marked on the remote control.
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) Batteries.
Remove batteries when the remote is not used for a long period of time.
REMOTE CONTROL
To Next Page
Loading...
