What to do if my Element LCD TV has normal picture but no sound?
If your Element LCD TV shows a normal picture but has no sound, check the volume level first. Ensure that the sound isn't muted by pressing the MUTE button. Try switching to another channel to rule out a broadcast issue. Also, verify that the audio cables are properly installed.
How to fix poor color or picture on Element ELCFW328?
To fix poor color or picture quality on your Element LCD TV, start by adjusting the color in the Menu option. Ensure there's sufficient distance between the TV and any VCR. Try tuning to another channel to see if the problem is with the broadcast. Check that the VIDEO cables are properly installed. You may also activate a function to restore the picture's brightness.
How to fix horizontal/vertical bars or picture shaking on Element ELCFW328?
If you are experiencing horizontal or vertical bars or picture shaking on your Element LCD TV, check for local interference, such as from an electrical appliance or power tool.
How to fix lines or streaks in pictures on Element LCD TV?
To fix lines or streaks in the pictures on your Element LCD TV, check the antenna and try changing its direction.
How to fix no output from one of the speakers of Element ELCFW328?
To fix no output from one of the speakers on your Element LCD TV, adjust the balance in the Menu option.
How to fix unstable or single color screen on Element LCD TV?
To fix an unstable or single color screen on your Element LCD TV, check the signal cable. If that doesn't work, try reinstalling the PC video card.
What to do if my Element ELCFW328 remote control does not work?
If the remote control for your Element LCD TV isn't working, first check for any obstructions between the remote and the TV. Then, make sure the batteries are installed with the correct polarity (+/-). Verify that the correct remote operating mode is set (TV, VCR, etc.). If none of these steps work, try installing new batteries.
What to do if my Element ELCFW328 LCD TV has no sound and picture?
If your Element LCD TV has no sound and picture, ensure the main plug is connected to a wall outlet. Check that you have pressed the POWER button on the front of the TV. Also, examine the picture contrast and brightness settings.
Why does my Element ELCFW328 LCD TV power suddenly turn off?
If your Element LCD TV suddenly turns off, check if the sleep timer is set. Also, verify the power connection to ensure it hasn't been interrupted. Finally, the station tuned may not be broadcasting.
What to do if my Element LCD TV screen is blue?
If your Element LCD TV screen is blue, it likely indicates that there is no signal. Press the SOURCE button to select the correct source.
To Next Page
General
