21
MENU OPERATION
Channel Menu Options
Air/Cable
Allows you to select antenna between Air and Cable.
Auto Scan
Use button to highlight “Auto Scan”, then
press button to enter into the following menu.
If you select “Air”as input signal in Antenna item, you can
press button to search the channels automatically.
The receivable channels will be stored automatically. When
searching channels, press MENU to stop.
If you select “Cable”as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Use button to highlight the “Start to Scan”, then press
button to search the channels automatically. The receivable
channels will be stored automatically. When searching
channels, press MENU to stop.
Press the MENU at the side of the panel or on the remote control and then use to move the
CHANNEL menu. Press or OK to enter (see picture below).
Favorite
Allows you to add these channels which you desired as the favorite channels.
Use button to highlight the “Favorite”item, then press button to enter into the following
menu.
Use button to highlight the desired item, then press OK
button to add or remove the highlighted channel as favorite.
MENU
MENU
MENU
MENU
To Next Page
Loading...
