What does it mean when the red LED indicator lights on my Element LCD TV?
If the red LED indicator is lit on your Element LCD TV, the set is likely in standby mode. Press either the Power button or the Standby button on the remote control to turn it on.
How to improve poor reception on some channels of Element LCD TV?
If you're experiencing poor reception on some channels with your Element LCD TV, the station or cable might be experiencing problems, so try tuning to another station. The station signal might be weak, so reorient your antenna for better reception. Also, check for sources of possible interference.
What to do if my Element LCD TV is dead and no LED is lit?
If your Element LCD TV is dead and no LED is lit, it indicates that there is no power to the TV. Check all connections to the TV's AC socket.
What to do if my Element LCD TV is dead and no LED lit red?
If your Element LCD TV is dead and no LED is lit red, the set may be in standby mode. Press either the Power button or the Standby button on the remote control.
What to do if the signal is out of range on Element ELCFW328 LCD TV?
If the signal is out of range on your Element LCD TV, adjust the resolution, horizontal, or vertical frequency. Check whether the signal cable is connected or loose. Also, verify the input source.
How to solve vertical bar or strip on the background, horizontal noise and incorrect position on Element ELCFW328?
To solve a vertical bar or strip on the background, horizontal noise, and incorrect position on your Element LCD TV, set the auto configure or adjust clock, phase, or H/V position.
To Next Page
General
