To Next PageTo Next PageWhat to do if the Element ELDFC551J LCD TV remote control does not work?
If your Element LCD TV remote control isn't working, check for obstructions between the remote and the TV. Ensure the batteries are installed with the correct polarity (+/-). Verify that the correct remote operating mode is set (TV, VCR, etc.). If these steps don't resolve the issue, try installing new batteries.
How to fix unstable screen color or a single color issue on Element LCD TV?
To fix unstable screen color or a single color issue on your Element LCD TV, check the signal cable and re-install the PC video card.
How to fix vertical bar or stripe on background, horizontal noise and incorrect position on Element ELDFC551J LCD TV?
To fix vertical bar or stripe on the background, horizontal noise, and incorrect position on your Element LCD TV, set the auto configure or adjust clock, phase or H/V position.
How to fix 'The signal is out of range' message on Element LCD TV?
To fix 'The signal is out of range' message on your Element LCD TV, adjust the resolution, horizontal frequency, or vertical frequency. Check whether the signal cable is connected or loose and verify the input source.
How to remove lines or streaks in pictures on Element LCD TV?
To remove lines or streaks in pictures on your Element LCD TV, check the antenna and change its direction.
How to fix horizontal or vertical bars or picture shaking on Element LCD TV?
To fix horizontal or vertical bars or picture shaking on your Element LCD TV, check for local interference, such as from an electrical appliance or power tool.
How to resolve poor reception on some channels of Element LCD TV?
To resolve poor reception on some channels on your Element LCD TV, try tuning to another station, as the station or cable may be experiencing problems. If that doesn't work, reorient the antenna to receive a better signal. Also, check for sources of possible interference.
How to improve poor color or picture quality on Element ELDFC551J?
To improve poor color or picture quality on your Element LCD TV, start by adjusting the color in the Menu option. Ensure there's sufficient distance between the TV and any VCR. Try switching to another channel, as the broadcast itself may be the issue. Verify that the VIDEO cables are correctly installed and activate any function to restore the brightness of the picture.
How to fix normal picture but no sound on Element ELDFC551J?
If your Element LCD TV has a normal picture but no sound, first check the volume level. If the volume is not the issue, make sure that the sound isn't muted by pressing the MUTE button. Try tuning to another channel, as the problem may be with the broadcast. Finally, ensure that the audio cables are installed properly.
General| Display Technology | LCD |
|---|---|
| HDMI Ports | 3 |
| Refresh Rate | 60 Hz |
| Smart TV | Yes |
| Built-in Wi-Fi | Yes |
| Screen Size | 55 inches |
