Why does the picture on my Element LED TV appear slowly after switching on?
This is normal. The image is muted during the product start up process. Please contact a service provider if the picture has not appeared after 5 minutes.
What causes horizontal/vertical bars or picture shaking on my Element ELEFC401?
Horizontal or vertical bars or picture shaking on your Element LED TV can be caused by local interference. Check for nearby electrical appliances or power tools.
What to do if my Element ELEFC401 has lines or streaks in pictures?
If your Element LED TV has lines or streaks in the picture, check the antenna and try changing its direction.
What to do if my Element ELEFC401 LED TV says the signal is out of range?
If your Element LED TV indicates that the signal is out of range, try adjusting the resolution, horizontal frequency, or vertical frequency. Check whether the signal cable is connected or loose, and verify the input source.
What to do if my Element ELEFC401 has a vertical bar or stripe on background, horizontal noise and incorrect position?
If your Element LED TV displays a vertical bar or stripe on the background, horizontal noise, and an incorrect position, set the auto configure or adjust clock, phase, or H/V position.
What to do if the screen color is unstable or is a single color on my Element ELEFC401 LED TV?
If the screen color on your Element LED TV is unstable or displays a single color, check the signal cable and re-install the PC video card.
To Next Page
General
