What to do if my Element ELEFW401A is dead and no LED lit red?
If your Element LED TV is dead and no LED is lit red, it may be set in standby mode. Press either the Power button or the Standby button on the remote control.
How to fix Element ELEFW401A LED TV with normal picture but no sound?
If your Element LED TV has a picture but no sound, first check the volume level. If the volume is not muted, press the MUTE button to be sure. Try tuning to another channel to rule out a broadcast issue. Finally, check that the audio cables are properly installed.
What to do if my Element ELEFW401A shows a blue screen?
If your Element LED TV displays a blue screen, it likely indicates no signal. Press the SOURCE button to select the correct input source.
What to do if my Element LED TV has no sound and picture?
If your Element LED TV has no sound and no picture, ensure the TV is properly connected to a wall outlet. Check that you have pressed the POWER button on the front of the TV. Also, check the picture contrast and the brightness settings.
Why does the picture on my Element LED TV appear slowly after switching it on?
This is normal; the image is muted during the product startup process. If the picture has not appeared after 5 minutes, please contact a service provider.
What to do if the signal is out of range on Element ELEFW401A?
If the signal is out of range on your Element LED TV, try adjusting the resolution, horizontal, or vertical frequency. Also, check whether the signal cable is connected or loose and verify the input source.
How to fix horizontal/vertical bars or picture shaking on Element ELEFW401A?
If you are experiencing horizontal or vertical bars or picture shaking on your Element LED TV, check for local interference from electrical appliances or power tools.
What does it mean when the red LED indicator lights on Element ELEFW401A LED TV are on?
If the red LED indicator lights are on on your Element LED TV, the set is likely in standby mode. Press either the Power button or the Standby button on the remote control.
How to fix unstable or single color screen on Element LED TV?
To fix an unstable or single color screen on your Element LED TV, check the signal cable. If the issue persists, try reinstalling the PC video card.
How to resolve horizontal or vertical bars or picture shaking on Element LED TV?
If you are experiencing horizontal/vertical bars or picture shaking on your Element LED TV, check for local interference, such as from an electrical appliance or power tool.
Details electrical safety precautions for the TV, including power supply, wiring, and protection against water.
Outlines physical safety measures, such as ventilation, avoiding impacts, cleaning, and installation near heat sources.
Introduces the remote control, detailing the function of each button for TV operation and multimedia playback.
Illustrates how to connect external devices like PCs, HDMI sources, and DVD players to the TV using various ports.
Guides users on powering the TV on/off and configuring initial settings via the Setup Wizard for optimal performance.
Guides users on setting up parental controls to block programming based on age ratings and content restrictions.
To Next Page
General
