How to resolve horizontal or vertical bars or picture shaking on Element LED TV?
If you are experiencing horizontal/vertical bars or picture shaking on your Element LED TV, check for local interference, such as from an electrical appliance or power tool.
How to fix lines or streaks in pictures on Element LED TV?
To fix lines or streaks in the picture on your Element LED TV, check the antenna and try changing its direction.
Why is the reception poor on some channels on my Element ELEFW401A?
If you're experiencing poor reception on some channels with your Element LED TV, the station or cable provider may be experiencing problems, so try tuning to another station. The station signal may be weak, so reorient your antenna for better reception. Also, check for any sources of possible interference.
Why does my Element LED TV power suddenly turn off?
If your Element LED TV suddenly turns off, check if the sleep timer is set. Also, check the power connection to ensure power is not interrupted. It's also possible there is no broadcast on the tuned station.
How to troubleshoot an Element ELEFW401A that is dead with no LED light?
If your Element LED TV is dead and has no LED light, the issue is likely due to no power. Check all connections.
How to improve poor color or picture quality on Element ELEFW401A?
To improve poor color or picture quality on your Element LED TV, start by adjusting the color settings in the Menu. Ensure there's sufficient distance between the TV and any VCRs. Try switching to another channel to see if the issue is with the broadcast. Also, check that the VIDEO cables are properly installed and activate any function to restore the brightness of the picture.
What to do if my Element LED TV has no sound and picture?
If your Element LED TV has no sound and no picture, ensure the TV is properly connected to a wall outlet. Check that you have pressed the POWER button on the front of the TV. Also, check the picture contrast and the brightness settings.
What to do if my Element ELEFW401A shows a blue screen?
If your Element LED TV displays a blue screen, it likely indicates no signal. Press the SOURCE button to select the correct input source.
How to fix Element ELEFW401A LED TV with normal picture but no sound?
If your Element LED TV has a picture but no sound, first check the volume level. If the volume is not muted, press the MUTE button to be sure. Try tuning to another channel to rule out a broadcast issue. Finally, check that the audio cables are properly installed.
Details electrical safety precautions for the TV, including power supply, wiring, and protection against water.
Outlines physical safety measures, such as ventilation, avoiding impacts, cleaning, and installation near heat sources.
Introduces the remote control, detailing the function of each button for TV operation and multimedia playback.
Illustrates how to connect external devices like PCs, HDMI sources, and DVD players to the TV using various ports.
Guides users on powering the TV on/off and configuring initial settings via the Setup Wizard for optimal performance.
Guides users on setting up parental controls to block programming based on age ratings and content restrictions.
Details electrical safety precautions for the TV, including power supply, wiring, and protection against water.
Outlines physical safety measures, such as ventilation, avoiding impacts, cleaning, and installation near heat sources.
Introduces the remote control, detailing the function of each button for TV operation and multimedia playback.
Illustrates how to connect external devices like PCs, HDMI sources, and DVD players to the TV using various ports.
Guides users on powering the TV on/off and configuring initial settings via the Setup Wizard for optimal performance.
Guides users on setting up parental controls to block programming based on age ratings and content restrictions.
To Next Page
General
