Elenberg MS-6140 - Basic Method of Performance

To Next Page

To Previous Page

Press [POWER] button and the digital display will shows this moment, the

system is in the standby state.

Selection of Timbres

There are 100 timbre options saved in this unit, you can choose from

“tOO” to “t99” freely.

1) When you turn on the unit, the stored timbre “tOO” is piano, you can

choose the timbres that you need by pressing the number buttons.

For example, when you select “32” timbres, press the number “3”

ﬁrst, and then press the number “2” ,the digital will display “ t32”, and

now you can perform the timbre “32” which you have selected.

2) Press the button [+] or [-] ,you also can choose the timbre that you

need. If the number buttons are controlled by the rhythm, you should

press the timbres button to change into the timbre status.

Master Volume Adjustment

There are 16 levels of the master volume from “00” to “ 15” and the de-

fault volume is “10” .Press “MASTER VOL MAX” button the master volume

is increasing and press “ MASTER VOL MIN” button the master volume

is decreasing. If you press the two buttons together, the master volume

will revert back to 10. The Master volume also control the accompani-

ment volume.

BASIC METHOD OF PERFORMANCE