Need help?Do you have a question about the Elenco Electronics M-1000B and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display Type | LCD |
| Diode Test | Yes |
| Continuity Test | Yes |
| Transistor Test | Yes |
| DC Voltage Range | 200mV to 1000V |
| DC Current Range | 200μA to 10A |
| Resistance Range | 200Ω to 2MΩ |
| Battery Type | 9V |
| Display Digits | 3.5 digits |
Key safety guidelines for using the multimeter, including handling, voltage limits, and inspection.
Explanation of various safety markings and symbols used on the multimeter for user awareness.
Lists the main functions, accuracy, and capabilities of the digital multimeter.
Details on display, polarity, overrange, operating temperature, power, and accessories.
Provides detailed accuracy and resolution for DC Voltage, AC Voltage, and DC Current measurements.
Details resistance measurement ranges, resolution, accuracy, and overload protection.
Specifies test conditions and base current for measuring transistor hFE values.
Describes the process and expected display for diode forward resistance measurement.
Essential steps and warnings before operating the multimeter for measurements.
Identifies and explains the function of each component on the multimeter's front panel.
Step-by-step instructions for performing DC Voltage, AC Voltage, DC Current, Resistance, and Diode measurements.
Procedure for safely removing and replacing the multimeter's battery.
Instructions for replacing the protective fuse, including fuse number details.
To Next Page
