Elentek EXPRESS PRO - Motor Screen Page

12
7. MOTOR SCREEN PAGE
From the main screen, by pressing the SETUP key, access is obtained to the motor screen page where
one can change the status of the selector (automatic - off - manual), view the absorption of each
motor and view hours of operation.
Hours of operation can be reset upon motor replacement by pressing the OFF key for 5 seconds.
Press the SETUP key again to return to the main screen.
M1 = AUT
3.0A 10000H
M1 = OFF
0.0A 10000H
M1 = MAN
3.0A 10000H
M2 = AUT
4.0A 10000H
M2 = OFF
0.0A 10000H
M2 = MAN
4.0A 10000H