The set number of starts/hour has been exceeded.
If set, the alarm stops the motor
The display and the red LED flash, activating the cumulative alarm
output and the 'BUZZ' output.
With analogue sensor activated, it indicates that the set alarm
threshold has been reached;
in the event of PRESSURIZATION operation, the alarm stops the motors;
in the event of DRAIN operation, the alarm does not stop the motors;
in the event of FILL operation, the alarm does not stop the motors;
The display and the red LED flash, activating the cumulative alarm
output and the "BUZZ" output.
The system automatically resets 5" after the set alarm level has
returned.
To Next Page
Loading...