3
SET UP AND SCALE SITTINGS
1.1 Contents
Check that scale comes the following contents:
Scale
Metal tray
Power adapter
Owner’s manual
Battery (optional)
1.2 Safety precautions
For safe use of the scale you must obey the following conditions:
Do not install on unstable surfaces
Avoid placing the scale near heater or in direct
sunlight
Avoid placed with strong drafts
Avoid extreme excessive temperature fluctuations
Avoid watering the scale
Use proper adapter provided from manufacturer
Cleaning of the scale must be performed when
scale is off. Do not use aggressive cleaning
chemicals. Use soft brush to clean printer
In case of flooding with liquids or other damage.
Turn off the scale and call your local service.
The scale must be properly leveled to ensure accurate
weighing.
Level the scale using the adjustable legs until the
bubble is in the small circle as showed on picture
Turn off the scale from main power.
Do not open the scale
Do not use chemically aggressive cleaners
Remove and clean the metal tray
If scale is heavily contaminated use damp cloth