English
Caution:
When feeding in wood, never insert your hands
beyond the steel shield.
By raising the safety screen, you are no longer
protected against wood chips flying out of the
machine.
If the equipment is primarily used for shredding leaves or damp
material using the standard sieve screen, the chances are good
that orifices will clog. To alleviate this problem, The ELIET damp
material shredding screen is a way around this. This shredding
screen is available from your ELEIT Dealer.
If only a small volume of leaves is to be processed, they can be
easily shredded using the standard screen. However, in this case,
ELIET recommend that leaves and branches should be shredded alternately. In so doing,
the wood chips prevent the screen orifices from clogging.
As the waste chippings are collected in a collection bag, care
must be taken in making sure at regular intervals that the chips
will not block the discharge situated on the underside of the
machine. Collection bag filling can be checked by looking through
the grid found beneath the loading hopper.
To promote collection bag consolidation, shake the bag regularly
to distribute the waste chippings to fill the empty spaces in the
collection bag.
If you should notice that, despite all of the preparation, a foreign object still finds its
way into the machine, the engine must be immediately shut off. The foreign object must
be removed first and then the machine must be examined for damage. If damaged, have
the damage repaired promptly.
As a rule, the engine will shut off automatically on removing the collection bag. If not,
possibly as the result of an electrical defect, immediately turn the engine off yourself
and refrain from using it until repaired.
REMOVING THE COLLECTION BAG = MOTOR SHUT OFF
23
To Next Page
Loading...
