Eliet Maestro - User Manual

HANDLEIDING - MANUAL - MANUEL - ANLEITUNG
Maestro

Summary

1. Introduction

1.1 Carefully Read this Operating Instruction Manual.

Emphasizes the importance of reading the manual for safe and reliable operation.

1.2 Identification Data - ELIET MAESTRO

Section to record machine identification details such as engine, power, and serial number.

5. Operator Safety Warnings

5.1 For your information

Explains the use of the 'information' symbol for specific details and additional information.

5.2 Caution

Defines the 'caution' symbol for safe usage habits and avoiding injury or damage.

5.3 Warning

Defines the 'warning' symbol for danger and the need to remain alert for safety.

6. Main parts

6.1. Machine survey

Provides a visual overview and identification of the main parts of the machine.

6.2 Engine

Details the components and specifications of the Briggs & Stratton engine.

7. Safety Regulations

7.1 Safety Messages

Explains safety decals and their meanings for user protection.

7.2 Safety Features

Describes safety features like collection bag, discharge funnel, safety screen, and loading hopper.

7.3 General Safety Precautions

Provides essential safety precautions for operating the machine and user conduct.

9. Operating instructions

9.1 Preliminary checks

Details pre-operation checks for oil, fuel, air filter, knives, and safety features.

9.2 Filling up with Petrol

Provides instructions and safety warnings for refuelling the machine with petrol.

9.3 Preparing the Operating Area

Guidance on clearing the work area, handling slopes, and positioning for wind.

9.4 Starting the Petrol Engine

Step-by-step instructions for starting the petrol engine, including choke and throttle use.

9.5 Using the Machine

Instructions for operating the machine during use, focusing on material feed and speed control.

9.5.1 Before Starting Work

Prepares the user for operation by covering apparel, planning, wood stacking, and engine warm-up.

9.5.2 During the work

Instructions for operating the machine during use, focusing on material feed and speed control.

9.6 Emptying the collection bag

Procedures for safely emptying the collection bag, including engine shut-off and weight warnings.

9.7 What To Do about Engine Stalling

Troubleshooting steps for engine stalling, including checking fuel, clearing jams, and inspecting for damage.

9.8 Cleaning the Machine

Details the importance of cleaning and the procedures for cleaning the machine and its components.

11. Maintenance

11.1 General

Information about dealer support, genuine parts, and requirements for a suitable maintenance area.

11.2 Servicing Schedule

Outlines routine checks and major overhauls based on running hours.

11.3 Routine Checks before the Start of Each Work Session

Details procedures for routine checks performed before starting work sessions.

11.4 Maintenance after 20 Running Hours

Describes maintenance tasks to be performed after 20 hours of machine operation.

Eliet Maestro Specifications

General

Power	6.5 HP
Fuel Type	Petrol
Hopper Capacity	60 L
Chipping Capacity	45 mm
Cutting Mechanism	Blades and Hammers
Wheel Size	Pneumatic