English
Warning:
When tipping the machine, petrol may leak out of the fuel tank through
the fill stud. Drain the fuel tank beforehand with the aid of a siphoning
kit. Flying sparks when grinding can be source of fire hazard when they
come into contact with petrol.
Remove the shredding screen from below the machine for easy access to the shred
knives. To do this, remove the two slide pins.
Sharpen the blade edge of the knives using an angle grinder,
Warning:
Always wear safety glasses and hearing protection when grinding kni-
ves. Gloves, too, are obligatory during maintenance work.
Dress along the bevel blade edge of the knife. Ensure that the blade edge is kept at
the same angle.
The top of the knife is subjected to the heaviest loads under shredding. Sharpen this
as little as possible so that it is not weakened. Correct and timely sharpening of the
shredding knives will extend their operating life.
For your information:
As soon as the top of the blade edge becomes blunt, the cutting edge
has reached the end of its operating life and must be renewed or turned
around.
After sharpening a knife, refit using a reversal of the procedure given for removal. To
permit easier assembly of the screen, apply some grease to the slide pins.
33
To Next Page
Loading...
