Elite Screens Elite Ez-Frame Series - ASSEMBLING THE FRAME

Parts List
1. Frame Parts x 6 pcs (4 top frame pcs. + 2 side frame pcs)
2. Tension Rods x 6 pcs (4 top/bottom rods + 2 side rods)
3. Screen Material x 1 pc
4. Center joints x 2 pcs
5. Elbow Joints x4 pcs
6. Wall brackets x 2~3 pcs
7. Screws x 16 pcs
8. User Guide x 1 pcs
9. Center Support Bar x 1~2 pc s (depending on model)
10. Support joiner x 2~4 pcs (depending on model)
11. Fix Plates x 30~90 pcs (depending on model)
12. Black cloth backing x 1 (AcousticPro1080 models only)
Note: Please make sure all parts are included in your package before proceeding to assemble your
Elite Screens fixed frame projection screen.
ASSEMBLING THE FRAME
1. Insert joint connector to horizontal frame piece and then fasten it with 2 screws
2. Insert the other horizontal frame piece to the joint connector and then fasten it with 2 screws.
(1)
1/2Long frame
Push