CAUTION
Please follow these instructions carefully to ensure proper maintenance and safety
with your ezFrame Screen
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets,
furniture, ladders, windows, etc. occupy the space designated for your Fixed-Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting
anchors are used and that the weight is supported appropriately by a strong and structurally sound surface
just as any large and heavy picture frame should.
(Please consult a home improvement specialist for the best advice on installation)
3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or any
other impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen
surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other
sharp or abrasive objects.
8. Spare Parts should be placed out of reach of small children in accordance with household safety
guidelines.
(8)
small wall bracket
7pcs
Position the screen with the
attached surface onto the top
wall bracket as shown in (fig.8).
Push down at the center of the
bottom frame rail to hook onto
the lower wall bracket
( fig.8)
2
1
OVERALL
HEIGHT - 1/4"
OVERALL
HEIGHT
Method 2 (larger than 135" diagonals)
(fi
. 9)
To Next Page
Loading...
