Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – ! info@elite.es
3.1 TECHNICAL REQUIREMENTS
A 6 bar air connection is required.
Connection voltage: 220V 3Ph 50/60 Hz
Required connection power: ? kW
3.2 ACCESSORIES INCLUDED
• Clamping jaw system to prevent vibration on large discs
• Saw holder for saw blades with a diameter of 230 to 850 mm.
• LED lamp lighting inside the work area
• Device for production of equal diameter saw blades.
• Machine closed by half enclosure.
• Prepared for connection to a machine filtration system or a centralized filtration sys-
tem.
To Next Page
Loading...