1. Remove packaging materials such as cardboard, plastics or Styrofoam and discard
appropriately.
2. Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
LID ASSEMBLY:
How to open the lid: Hold the handle (1) firmly, turn the lid (2) clockwise until it loosens
and lift vertically. (Figures 3-4); the lid (2) can stand on the Lid Rest (20) (Figure 5).
Note: For new units, the seal of the lid (2) may be slightly stronger than normal and may
be slightly difficult to unlock. Once the lid (2) has been opened and closed several times,
it will loosen up.
How to close the lid: Take the lid (2) off the lid rest (20) (Figure 6), hold the handle (1) and
close it downwards at the Opened Lid position (Figure 7). Turn counter-clockwise until
you reach the Closed Lid position. (Figure 8)
To Next Page
Loading...
Need help?
General
