PARTS IDENTIFICATION
1. Handle 9. Upper Ring 17. Filter
2. Lid 10. Control Panel 18. Rubber Seal Ring
3. Pressure Limiting Valve 11. Power Cable 19. Sensor
4. Float Valve (external view) 12. Condensation Cup 20. Lid Rest (lid latches onto the
5. Float Valve (internal view) 13. Main Body side handle)
6. Inner Pot 14. Electronic Heater 21. Glass Lid (to be used with the
7. Outer Pot 15. Bottom Ring Slow Cook function)
8. Handle 16. Seal Ring for Float 22. High and Low Racks
Valve
The Inner Pot (6) consists of a non-stick
surface. To avoid scratching the non-stick
surface, please use wooden or plastic utensils.
During the process of removing the lid, please ensure that the height between the lid and the
upper edge of the cooker is always approximately 10cm. This is to ensure smooth
movement when turning and removing the lid.
To Next Page
Loading...
Need help?
General
