ELITE MULTI Rev. 2.1
USING STIMULATION
PRACTICAL USE
For a correct use, proceed as follow:
- check that the stimulator is not connected to the electric system for the battery
rechargement;
- connect the cables to the special output;
- attach the electrodes to the cables already connected to the stimulator;
- place the electrodes on the skin;
The stimulator and its accessories must be put back in the special bag respecting
the following conditions:
Temperature: 5-45 °C
Humidity: 20-85 %
Start up and navigation
To turn on press the button On/Off (OK) for three seconds until a bip is heard
Low left of the display, The software version and the model will be displayed for
three seconds
18
To Next Page
Loading...