ECS-10HT1 Temperature controller instruction
1.Product Overview
ECS-01HT1 Universal temperature controller can convert Fahrenheit, Celsius display display,
switching cooling / heating mode. The allocation of cabinet temperature sensor and defrosting control
sensor. Optional defrost relay output and copy card function.
2.operation and display panel
3.Specifications and dimensions
Installation dimension : 71mm×29mm Controller size : 78.5mm×34.5mm×74mm
4.Technical parameters
1）Measuring range : -50～99℃/℉ (only refers to the sensor calibration value is set to 0)
2）Temperature resolution : 9.9～-9.9 , 0.1℃/℉ , the others,1℃/2℉
3）Measurement accuracy : -40℃～50℃ , ±1℃ , 50℃～70℃ , ±2℃ , the others : ±3℃
or -40℉～99℉, ±2℉ , the others : ±6℉
4）Temperature controlling range : -50～99℃/℉
5）Power supply : 220±10%(VAC) , 50/60Hz
6）power consumption : <3W
7）Rated current of the relays :
Refrigeration : 30A/220VAC , it can directly drive 1.5 HP (220VAC) compressor , single phase
17A/220VAC , it can directly drive 1.0HP (220VAC) compressor , single phase
Defrost: 10A/220VAC( suggest connect the max 1.4 KW electric heating wire)
8) Front panel water proof : IP65
9）The back shell water proof : None
10) Operation condition : 0℃～55℃
11) Storage condition : -25℃～75℃,
12) Relative humidity : 20%～85% (relative humidity )
5.Indicator light status description
To Next Page
Need help?
General
