Need help?Do you have a question about the Eliwell EW974 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Front Panel Protection | IP65 |
| Input Type | 4-20mA |
| Power Supply | 24V AC/DC |
| Relay Output | 8A/250V AC |
| Accuracy | ±1 digit |
| Resolution | 0.1 °C/°F or 1 °C/°F depending on the probe and configuration |
| Serial Communication | RS485 (optional) |
| Protection Degree | IP20 |
| Temperature Range | Depending on the probe used |
Controls menu navigation and value increase.
Controls menu navigation and value decrease.
Accesses menus, confirms commands, displays alarms.
How to view and modify the Set point value.
How to enter and navigate the Programming menu.
Describes fault, cause, effects, and remedy for Probe1 failure.
Describes fault, cause, effects, and remedy for Probe2 failure.
Conditions for alarms based on relative temperature values.
Parameters related to compressor operation, timing, and protection.
Parameters controlling defrost type, interval, and duration.
Parameters for fan operation, stop temperature, and delay.
Parameters for setting alarm thresholds and delays.
Parameters for device configuration, inputs, and button functions.
To Next Page