Need help?Do you have a question about the Eliwell EWCM 4150 and is the answer not in the manual?
General| Protection Degree | IP20 |
|---|---|
| Input Type | NTC, PTC |
| Output Type | Relay |
| Resolution | 0.1 °C |
| Digital Inputs | 2 |
| Analog Inputs | 1 |
| Serial Communication | RS485 |
| Buzzer | Yes |
| Operating Temperature | -10 to 55 °C |
| Relative Humidity | 10–90% RH, non-condensing |
Provides critical safety instructions for electrical connections to prevent damage or injury.
Details the configuration options for the device's analogue input channels.
Explains the configuration parameters for the device's digital input channels.
Covers the configuration parameters for the device's digital output channels.
Details the configuration of PWM and open collector outputs for fan control.
Explains the configuration options for the Triac output used for fan or compressor control.
Describes the configuration parameters for the low voltage analogue AO3 output.
Details the operation and control logic for inverter compressors.
Explains the control logic and operation for digital compressors.
Defines the minimum on/off times and delays for compressor switching to ensure reliability.
Describes how power stages are enabled and configured for compressor operation.
Lists all alarm codes, their descriptions, causes, and activation conditions.
Provides specific actions and notes associated with various alarm codes for troubleshooting.
To Next Page