Need help?Do you have a question about the Eliwell EWCM 4180 and is the answer not in the manual?
General| Model | EWCM 4180 |
|---|---|
| Category | Controller |
| Accuracy | ±0.5 °C |
| Resolution | 0.1 °C |
| Buzzer | Yes |
| Frontal protection | IP65 |
| Operating Temperature | -10...60 °C (14...140 °F) |
| Storage Temperature | -20 to 70 °C |
| Display | LCD |
| Communication | RS485 |
| Digital inputs | 2 |
| Power Consumption | 3 VA max |
| Output Voltage | 24 V AC/DC |
| Protection Degree | IP65 |
| Mounting | Panel mounting |
| Relative Humidity | 10...90%RH non condensing |
Illustrates the electrical connections for different models and components.
Explains the configuration of analogue inputs (AI3, AI4) and related parameters.
Describes the setup and configuration of digital inputs (DI1-DI5).
Details the configuration of high and low voltage digital outputs (DO1-DO6).
Explains the configuration of PWM and open collector outputs for fans (AO1, AO2).
Explains how the controller manages inverter compressors based on probe values.
Describes the controller's logic for managing digital compressors and power steps.
Explains digital fan control modes, pick-up, and proportional band regulation.
Comprehensive list of all configurable parameters with their ranges and default values.
To Next Page