Need help?Do you have a question about the Eliwell EW971 and is the answer not in the manual?
General| Model | EW971 |
|---|---|
| Frequency | 50/60 Hz |
| Type | Controller |
| Input Type | NTC, PTC |
| Output Type | Relay |
| Resolution | 0.1°C |
| Accuracy | ±0.5% |
| Buzzer | Yes |
| Output Relay | SPDT 250 V AC |
Displays and modifies the target temperature value.
Manages access levels to parameters using passwords PA1 and PA2.
Indicates malfunctions with the primary or secondary temperature probes.
Signals when probe readings exceed high or low temperature thresholds.
Instructions and precautions for connecting electrical components.
Sets the primary temperature setpoint for the controller.
Settings related to compressor operation, timing, and protection.
Settings for defrost cycle type, interval, and duration.
Settings for evaporator fan operation and behavior.
Settings for device behavior and inputs.
To Next Page