EasyManua.ls Logo

Eliwell EWRC 500 NT User Manual

Eliwell EWRC 500 NT
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EWRC 300/500 NT
Controllers for static and ventilated cold rooms
English
QUICK START
Question and Answer IconNeed help?

Do you have a question about the Eliwell EWRC 500 NT and is the answer not in the manual?

Eliwell EWRC 500 NT Specifications

General IconGeneral
BrandEliwell
ModelEWRC 500 NT
CategoryController
LanguageEnglish

Summary

QUICK START

INTRODUCTION

NAVIGATION DIAGRAM

Illustrates the device's button functions and display navigation flow for key operations.

MECHANICAL INSTALLATION

Provides step-by-step instructions and diagrams for physically mounting the device.

ELECTRICAL CONNECTIONS

MODELS WITH COVER AND INSTALLED MINIATURE CIRCUIT BREAKER

DISPLAY

KEYS

USER INTERFACE

HOW TO MODIFY THE SETPOINT

Guide on adjusting the target temperature value using the device's interface.

HOW TO READ THE PROBE VALUE

Instructions on how to view current temperature readings from connected probes.

HOW TO MODIFY THE USER PARAMETERS

Steps to access and change user-configurable parameters for device operation.

OPERATION IN DEFAULT CONFIGURATION

COMPRESSOR OPERATION

Details on how the compressor functions based on temperature setpoints and differentials.

DEFROST OPERATION

Explains the defrost cycle modes, timing, and conditions for activation and termination.

MANUAL DEFROST

Describes the procedure for manually initiating a defrost cycle using the device's keys.

EVAPORATOR FANS

Information on the configuration and operation of the evaporator fans.

SUPERVISION

TECHNICAL SUPPORT

ALARMS AND TROUBLESHOOTING

HOW TO DISPLAY THE ALARMS

Instructions on navigating the device interface to view active system and HACCP alarms.

HACCP ALARMS

Details specific to HACCP alarms, including logging, types, and potential disabling.

ALARMS TABLE

WARNINGS

TECHNICAL SPECIFICATIONS (EN 60730-2-9)

FURTHER INFORMATION

FOOD SAFETY

Information regarding the device's compliance with EN13485 standards for food storage.

CONDITIONS OF USE - PERMITTED USE

Guidelines for safe installation and operation, specifying permitted uses and precautions.

PROHIBITED USE

Outlines uses of the device that are not permitted and potential risks associated with relays.

RESPONSIBILITY AND RESIDUAL RISKS

Disclaimer of liability for damages arising from improper installation, use, or modification.

DISCLAIMER

Legal statement regarding document accuracy, reproduction rights, and liability.

DISPOSAL

Instructions on how to dispose of the equipment in compliance with local waste legislation.

CUT OUT

Related product manuals