To Next PageTo Next Page
Need help?Do you have a question about the Eliwell EWPlus 902 and is the answer not in the manual?
General| Model | EWPlus 902 |
|---|---|
| Frontal Protection | IP65 |
| Type | Controller |
| Input Type | NTC |
| Output Type | Relay |
| Display | LED |
| Power Supply | 230V AC |
| Operating Temperature | 0 to 50°C |
| Accuracy | ±0.5% f.s. + 1 digit |
| Resolution | 0.1°C |
| Serial Communication | TTL |
| Protection Rating | IP20 |
| Digital Inputs | 1 |
| Power Consumption | 3 VA |
Explains the function of the UP, DOWN, STAND-BY (ESC), and SET (ENTER) keys for device operation.
Details the meaning of various LED indicators on the EWPLUS control units.
Guide to accessing and navigating the device's menu structure.
Information on locking the set point edit function to prevent unauthorized changes.
Instructions for accessing the programming menu, setting parameters, and managing password protection.
Information on fault codes, causes, effects, and remedies for device alarms.
Procedures for manual defrost activation and interpreting diagnostic indicators.
Guidelines for the physical installation of the device.
Procedures for using the copy card for parameter transfer, formatting, and reset downloads.
Defines how maximum and minimum temperature alarms are configured and triggered.
Outlines the intended and prohibited applications of the device.
Details input/output characteristics, mechanical specs, and operating conditions.
Information on the device's compliance with relevant directives and standards.
A detailed list of device parameters with their settings and default values.
Information on connecting the device to telecontrol systems and software.
Diagrams and instructions for wiring the device's electrical connections.
States the manufacturer's liability limitations and residual risks.
Legal disclaimers and warranty terms for the Eliwell controls.
