BASIC FUNCTIONS
The user has a display and 4 keys for programming the instrument and checking its status.
When the instrument is powered on for the first time it performs a lamp test, during which time the display and LEDs
flash for several seconds to check that they all function correctly. The instrument has two main menus, the “Machine
state” menu and the “Programming" menu.
EWCM4120 and EWCM4180 EWCM4150
LEDs
Symbol / icon
Description Icon on front panel
(8) … (11)
EWCM4120-EWCM4180
Fan bar (configurable LEDs using parameters UI07…UI10)
EWCM4150
LEDs NOT configured (configurable LEDs using parameters UI07…UI10)
Programming menu
Alarm. If permanently on the alarm is active, if flashing the alarm is
silenced.
Heating. Heating mode
14
To Next Page
Loading...
