ICONs
Decimal Point Temperature
Permanently on: decimal point Permanently on: displays a temperature
Flashing: Soft Start active Flashing: reduced set active, displays
a temperature or no unit of
measure selected
Off: otherwise
Pressure Humidity
Permanently on: displays a pressure Permanently on: displays a humidity
Flashing: reduced set active and displays
a pressure
Flashing: reduced set active and displays
a humidity
Relay OUT1 Relay OUT2
Permanently on: OUT1 output active Permanently on: OUT2 output active
Flashing: a delay, a protection or a locked
start-up
Flashing: a delay, a protection or a locked
start-up
Off: otherwise Off: otherwise
Alarm
NOTE:
When switched on, the device performs a Lamp Test; the
display and LEDs will flash for several seconds to check that
they all function correctly.
Permanently on: alarm active
Flashing: alarm acknowledged
Off: otherwise
To Next Page
Loading...
Need help?
General
