P 2500 - P 500
2
7.4 Opening / closing the housing
WARNING!
Rotating and/or linear movable components can cause
serious injuries.
Do not reach into moving parts or handle any moving
components during operation.
Turn the appliance off before any maintenance work,
repair work or other work and secure it against
unintentional restarting.
Open the housing with the access panel key. The key is located in the
accessory box.
Removing the housing hood:
Drawing 7
1. Remove the hood by pressing the release levers to the outside (1). The
hood raises itself.
2. Now take the hood off upwards - using both hands (2).
To Next Page
Loading...
