Elkay LZSTL8WS 1D Series User Manual

* Versatile cooler design allows units to be installed either left-hand high and right-hand low or left-low and right high.
Basin change may be required. See desired rough-in to help determine if the basin change is necessary.
Important: The refrigerated coolers must be hung on the right side.
Enhanced
INSTALLATION & USE MANUAL
LZ
™
Series Bottle Filling Stations & Coolers
Page 1 1000004543 (Rev. C - 07/19)
ENLZSTL8WS_1G

Elkay LZSTL8WS 1D Series Specifications

General

Brand	Elkay
Model	LZSTL8WS 1D Series
Category	Water Dispenser
Language	English

Summary

Installation Rough-in Diagrams

Standard Left-Hand High Rough-in

Detailed diagram for left-hand high, bottle filler low configuration rough-in.

Alternate Right-Hand High Rough-in

Alternate diagram for right-hand high, bottle filler low configuration rough-in.

Alternate Left-Hand Low Rough-in

Alternate diagram for left-hand low, bottle filler high configuration rough-in.

Alternate Right-Hand Low Rough-in

Installation Steps and Procedures

Hanger Bracket and Cooler Mounting

Instructions for mounting hanger brackets and securing coolers to the wall.

Bottle Filler Installation

Step-by-step guide for installing the bottle filler unit.

Filter Installation and Programming Access

Configuration for Bi-Level Mounting

Bi-Level Mounting Configuration

System Components and Diagrams

Service and Maintenance

Cooler Component Servicing

Cleaning and Operational Adjustments

Programming Instruction

Menu Navigation and Settings