Need help?Do you have a question about the Elko SHT-1 and is the answer not in the manual?
Explains manual control functionality which takes precedence over other set modes.
Covers menu SET 1 for program setting, adjustment, and deletion.
Details menu SET 2 for configuring device date and time settings.
Explains menu SET 3 for choosing between programmed or random operating modes.
Describes menu SET 4 for configuring pulse or cyclic mode intervals.
Covers menu SET 5 for activating and configuring the holiday mode.
Explains how to exit menus and return to the starting mode.
Process for adding new programs to the time switch.
Selecting channels (SHT-1/2, SHT-3/2) and daily/night modes (SHT-3, SHT-3/2).
Configuring the output switching modes (ON, cyclic, pulse, OFF).
Setting date for yearly mode and activity for daily mode.
Setting the start and end times for programmed switching.
How to edit or adjust programs that have already been saved.
Process for selecting and accessing specific programs for modification.
Adjusting channel selection (SHT-1/2, SHT-3/2) and set modes (SHT-3, SHT-3/2).
Adjusting switching modes, date, and time settings for programs.
Fine-tuning the ON/OFF activity for specific days in daily mode.
Configuring the current year for the device.
Setting the current month and day.
Setting the time in 24-hour or 12-hour format and adjusting hours.
Setting minutes and activating automatic summer/winter time changeover.
Choosing the active channel for SHT-1/2 and SHT-3/2 models.
Setting the device to operate based on programmed schedules.
Configuring random switching within a 10-120 minute interval.
Selecting the channel for pulse or cyclic mode operations.
Setting the duration for pulse or cyclic switching intervals.
Configuring delay or cycle duration, specific for pulse mode.
Activating the holiday mode feature on the device.
Configuring the year, month, and day for the holiday period start.
Setting the year, month, and day for the holiday period end.
Procedures for exiting menus and returning to the main display.
Explanation of short and long button presses for navigation.
Step-by-step guide to setting the switch-on time and program.
Steps to configure the switch-off time and activity days.
Process for saving the program and returning to the starting menu.
How to activate the reset function using a blunt spike.
What information is displayed after initiating a reset.
Details on what data and functions are deleted or saved by a reset.
To Next Page
General
