How to produce Soft Ice Cream
To prepare the product mix use only drinkable water.
Clean the machine as described in the previous paragraph.
Remove the cover and pour the mix in the tank (max 4 liters - recommended 2,5/3 liters).
Warning: It is recommended to pour an already refrigerated product
When you switch on the machine (page20 pos.F), the following menu will be displayed
and
Press the key to start the augers rotation. The following menu is displayed
To stop the augers press the key for at least 2 seconds.
If you press the button, you can select “SOFT MODE”, “NIGHT MODE” or return to the “MOTOR ON” condition
in which the augers rotate. According to the display setting you can see
If you set “Soft mode” you will read “WAIT PLEASE” on the line below. This message indicates that the product is not
ready yet. In this condition the augers turn at 70rpm (default); this can be adjusted by changing the submenu
settings in the SERVICE section.
To view the menu options, press the button on the electronic control unit.
Use the or keys to find the TLI screen
Press the button to confirm and view the TLI temperature that has been set on the electronic control panel.
If the product supplier has not provided clear instructions, using the key to decrease the TLI values to -
8,5°C/16.7°F. Press the button to confirm.
To exit the menu press the key.
In this case, the electronic control unit will automatically seek the ideal temperature for the product in the tank.
Even if the machine is set to a TLI temperature of -8,5°C/16.7°F, this does not necessarily mean that the
product in the tank (see temperature on the TANK TEMPERAT. screen) will arrive at said temperature. As the
electronic module automatically searches for the ideal product temperature, the temperature registered on
the TANK TEMPERAT. display may be higher than that on the TLI screen; product temperatures may vary
according to the type of product used.
Soft Premium Cream
Rev. XX
To Next Page
Loading...
Need help?
General
