1
PROBLEM SOLVING GUIDE ELMECO SLUSH MACHINE MODEL FCM
A01 – INSTRUCTIONS ON HOW TO READ REFERENCES .........................................................................................2
A10 – FEATURES AND TECHNICAL SPECIFICATIONS .............................................................................................3
A15 – RECOMMENDED PREVENTIVE MAINTENANCE SPARE PARTS KIT ....................................................................3
A20 – IMPORTANT INFORMATION ON FUNCTIONALITY OF THE FCM CONTROL BOARD .............................................4
P01 – MACHINE DOES NOT FREEZE AND RED LIGHT LOCATED NEAR THE MAIN POWER SWITCH (POS.72) IS ON.......5
P02 – MACHINE DOES NOT FREEZE EVEN THOUGH THE SOLENOID VALVE IS ON (SOLENOID LIGHT LOCATED ON
THE SCREEN IS ON; HIGH PRESSURE RED LIGHT REMAINS OFF - POS.72) .............................................................7
P03 – IN SLUSH MODE MACHINE DOES NOT FREEZE AND SOLENOID LIGHT DOES NOT COME ON ON THE
CONTROL BOARD’S SCREEN; IN COLD/DEFROST MODE MACHINE WORKS PROPERLY ..............................................9
P04 – CONTROL BOARD’S SCREEN IS BLINKING; WHEN MENU BUTTON PRESSED AND RELEASED, "ALARM MOTOR"
COMES ON THE SCREEN; MIXING AUGERS TURN................................................................................................ 10
P05 – CONTROL BOARD’S SCREEN IS BLINKING; WHEN MENU BUTTON PRESSED AND RELEASED, "ALARM MOTOR"
COMES ON THE SCREEN; MIXING AUGERS DO NOT TURN ................................................................................... 12
P06 – ONE TANK OVER FREEZES, OTHER ONE DOES NOT FREEZE AT ALL ............................................................. 13
P07 – MACHINE OVER FREEZES IN COLD/DEFROST MODE................................................................................... 14
P08 – MACHINE DOES NOT FREEZE; PRODUCT INSIDE ALL TANKS REMAIN AT AMBIENT TEMPERATURE; RED LIGHT
LOCATED NEAR THE MAIN POWER SWITCH (POS.72) IS OFF ............................................................................... 15
P09 – CONTROL BOARD’S SCREEN BLINKS. WHEN MENU BUTTON PRESSED AND RELEASED "ALARM VOLTAGE" COME
ON THE SCREEN. ............................................................................................................................................. 17
P10 – ALL CONTROL BOARDS REMAIN OFF; MIXING AUGERS DO NOT TURN; LIGHTS INSIDE THE TANK LIDS REMAIN
OFF. ONLY COMPRESSOR AND CONDENSER FAN MOTOR WORK. .......................................................................... 18
P11 – CONTROL BOARD’S SCREEN IS BLINKING. AFTER PRESSING AND RELEASING MENU BUTTON "ALARM
THERMAL" COMES ON THE SCREEN. .................................................................................................................. 19
P12 – CONTROL BOARD’S SCREEN IS BLINKING. AFTER PRESSING AND RELEASING MENU BUTTON "ALARM LEVEL"
COMES ON THE SCREEN. MACHINE WORKS PROPERLY........................................................................................ 21
P13 – MACHINE DOES NOT FREEZE; MIXING AUGERS DO NOT TURN, LIGHTS IN THE TANKS’ LIDS REMAIN OFF...... 22
P14 - CONTROL BOARD DOES NOT COME ON ..................................................................................................... 24
P16 – MIXING AUGERS DO NOT TURN; MACHINE DOES NOT FREEZE ................................................................... 25
P17 – HORIZONTAL MIXING AUGER "SKIPS", MAKING LOUD NOISE ..................................................................... 27
P18 – LAUD SQUEAKING NOISE COMES FROM THE INSIDE OF THE TANK, WHEN MIXING AUGERS ARE TURNING..... 29
P19 – PRODUCT LEAKS FROM UNDERNEATH THE TANK INTO A DRIP TRAY ........................................................... 30
P20 – PRODUCT DRIPS FROM THE DISPENSING SPOUT WHILE IT IS IN A CLOSED POSITION ................................. 32
P21 – IN SLUSH, COLD & DEFROST MODES MACHINE OVER FREEZES OR DOES NOT FREEZE AT ALL ...................... 33
To Next Page
Need help?
General
