28
Connecting to HDMI terminal
1. Connect the projector to a device such as a DVD-player using HDMI
cable.
Connect the HDMI output terminal of your device such as a DVD-player and
computer to the HDMI terminal of the projector using an HDMI cable (sold
separately) as shown in the below picture. Firmly insert the cable into the
connector.
BACK
■ Use the HIGH SPEED HDMI cable with HDMI logo.
HDMI cable that is not compliant with HDMI standard may not be used.
■ This projector complies with HDMI standard. However, we do not
guarantee the operation with all the output devices.
■ Do not apply excessive force to the HDMI terminal while an HDMI output
device is connected. It could damage the HDMI terminal, leading to a
malfunction.
Device
(such as a DVD-player)
HDMI cable
(Sold separately)
To Next Page
Loading...
Need help?
General
