Elmo Cast - Device management

17
●Device management (✔:Default setting)
Menu item
Description
When the
changes
take effect
Language
To set the display language. Default setting: [Auto]（The display
language will be set to the language used for the OS.）
Immediately
Device Name
To change the device name.
・Hide SSID
OFF ✔
To display SSID.
ON
To hide SSID.
・Turn Off
OFF ✔
To enable SSID function.
ON
To disable SSID function.
After reboot
Resolution
To set the output resolution from the HDMI port. Default setting: [Auto]
After reboot
Display Mode
To set the display mode.
Fit to Screen ✔
To maintain aspect ratio of the input source.
Stretch Full
Screen
To display in full screen.
After reboot
AirPlay Mode
To enable / disable display via AirPlay.
・AirPlay Mirroring
ON ✔
To enable AirPlay.
OFF
To disable AirPlay.
・AirPlay mode
Auto ✔
To automatically perform mirroring or video
streaming.
Screen
Mirroring Only
To support screen mirroring only.
Screen
Mirroring ＋
Video
Streaming
To support both screen mirroring and video streaming.
※The receiver needs to be connected to the network.
After reboot
Air View
Not used.
-
EZNote
Not used.
-
Castcode
Control
To set castcode. Castcode will be displayed at the bottom of the
Home screen.
When this setting is set to “Random” or “Fixed”, you will need to enter
castcode to perform mirroring or video streaming.
OFF ✔
To disable castcode.
Random
To generate castcode randomly.
Fixed
To generate fixed castcode (4 digit number).
Immediately
Maximum
Connections
To set the maximum number of devices than can be connected to the
receiver wirelessly.
4 ／ 8 ✔ ／ 16 ／ 32
Immediately
Android audio
streaming
Not used.
Immediately
Google Cast
Support
To set ON✔/OFF the Google Cast function.
Immediately
Miracast Support
To set ON✔/OFF the Miracast function.
After reboot