18
●Network management (✔:Default setting)
When the
changes
take effect
To display the connection condition of the receiver to the existing
network.
By selecting this item when the receiver is connected to the WiFi
router, it is possible to connect the receiver to the Internet via WiFi.
Internet access is established.
SSID of the connection destination will be
displayed.
To set whether to save WiFi settings. (ON✔/OFF)
When this setting is ON, the WiFi connection will be established
automatically at next reboot.
To set the IP address of the receiver.
Select whether to set the IP address automatically or manually when
connecting to the Internet with WiFi.
To set the WiFi password.
The password can be hidden.
To set country, channel, and bandwidth for WiFi.
To set ON/OFF✔ the PIN code setting.
To enable WiFi 2.4GHz by setting this mode to ON.
※Note that turning this setting ON will degrade the performance.
With this receiver, 5GHz band and 2.4GHz band cannot be used at
the same time.
※The frequency band used is that of the device that was first
connected to the receiver.
To set ON/OFF✔ the automatic restart function.
When this setting is set to ON, the receiver will reboot automatically if
no casting operation is performed for 8 hours.
To Next Page
Loading...