ELNA 6600 - Twin Needle Decorative Sewing; Satin Stitches - Elongation; Mirror Image

65
Twin Needle Decorative Stitches
Why not try two different thread colors in the needles?
Select a decorative stitch.
“Twin Needle” key should still be selected. Hand turn
flywheel to test if needles hit the foot.
Place fabric and stabilizer under foot and sew.
After completing twin needle sewing, turn OFF the power
switch. Remove twin needle. Set up machine for single
needle sewing.
NOTE: If a stitch is not compatible with a twin needle, a
warning message will appear in the LCD screen.
Alphabets and monograms (300, 400 and 500
stitch numbers) will not function with the Twin
Needle Key.
Satin Stitches – Elongation
Satin stitches 035 – 050 can be lengthened up to five
times their original size without the stitch length varying.
Select 044.
Press “Elongation” key. (Each touch changes readout to
next elongation.)
Place fabric and stabilizer under foot and sew. Press
“Auto-lock” key while sewing and machine will complete
the design, lockstitch and automatically stop.
• Change the stitch width or length for maximum
options when combined with elongation.
Mirror Image
Expand the possibilities by horizontally flipping the stitch.
Select 035.
Press “Mirror Image” key.
Place fabric and stabilizer under foot and sew. Press
“Auto-lock” key while sewing and machine will complete
the design, lockstitch and automatically stop.
X 3
X 4
X 5X 1
X 2