EasyManua.ls Logo

ELNA 664 Pro - Thread Tension (2 threads); Needle;Lower looper thread tension is out of balance (2); Balanced tension for rolled hem 2

ELNA 664 Pro
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82
2
3
4
2
3
4
2
3
4
2
3
4
Needle/Lower looper thread tension is out of
balance (2)
The illustration shows sewing results when the
needle thread tension is too tight and/or lower looper
thread tension is too loose.
Remedy:
Loosen needle thread tension and/or tighten lower
looper thread tension.
Left needle thread tension dial
Right needle thread tension dial
Lower looper thread tension dial
Balanced tension for rolled hem 2
The illustration shows sewing result with balanced
tension settings.
Set the changeable thread guide at the lowered
position.
Tension adjustment may be required depending on
the type and thickness of fabric and threads being
used.
Make a trial sewing with the fabric and threads you
wish to use to obtain in the best results by adjusting
tension.
Wrong side of fabric
Right side of fabric
Needle thread
Lower looper thread
9
10
11
1
2
4
3
9
10
11
1
3
2
4
1
2
3
4

Table of Contents

Related product manuals