22
• Threading the Needle on the Left
Place the spool of thread on the left side spool pin.
* The points to thread for needle on the left are
marked in orange.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide on the
left from back to front: (A)
1
Thread guide
2. Pass the thread through the holes on the left of
thread guide plate as illustrated.
2
Thread guide plate
1
2
1
3
4
5
2
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
2
6
7
1
(A)
(B)
To Next Page
Loading...
Need help?
General
