37
Multiple Zigzag Stitch (Tricot stitch)
Machine settings
q Pattern: MODE 1: 12
w Thread tension: AUTO
e Presser foot: Zigzag foot A
r Foot pressure: 5
q
e
w
r
This stitch is used to nish a raw edge of synthetics and
other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.
Overcasting Stitch
Machine settings
q Pattern: MODE 1: 13
w Thread tension: AUTO
e Presser foot: Overedge foot C
r Foot pressure: 5
q
e
w
r
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams at.
Place the fabric edge next to the guide of the foot and
then sew.
CAUTION:
Stitch width should be set between 5.0 and 7.0.
The blue tipped needle is recommended for stretch
materials.
To Next Page
Loading...
