Why do threads bunch up on the underside of stippling designs on my ELNA Sewing Machine?
Threads may bunch up on the underside of the stippling design pattern on your ELNA Sewing Machine if the minimum length of the jump thread cutting is too short.
General| Brand | ELNA |
|---|---|
| Model | eXpressive 860 |
| Category | Sewing Machine |
| Language | English |
Warning about leaving the appliance unattended when plugged in.
Basic safety precautions for operating the sewing machine.
Steps to connect the power supply cable and plug in the machine.
How to adjust sewing speed using the slider and foot control.
Explains the function of each button on the machine's control panel.
Steps for winding a bobbin and inserting it into the bobbin holder.
Detailed steps for threading the needle and take-up lever.
Procedure and safety precautions for changing the needle.
Instructions for switching between ordinary and embroidery modes.
Steps to attach the embroidery unit to the sewing machine.
Instructions for cleaning the hook area, bobbin holder, and feed dog.
Diagnoses and solutions for noisy machines and thread breakage.
Troubleshooting for skipped stitches, seam puckering, and fabric feeding.
Resolves issues with distorted patterns and unbalanced buttonholes.
To Next Page
