Storing your Elnapress
Turn the Elnapress off by pressing the ON/OFF switch
until the green and red LEDs lights go off. Unplug the
mains lead from both the press and the wall socket.
While the press is still hot, open and close several
times to dry the board cover.
Note : Do not close or lock the Elnapress before it
has cooled down completely.
The heating shoe should be cleaned as needed, and
the padding foam and board cover should be regu-
larly replaced. The board cover can be washed at
60°. (Please see the Maintenance section.)
Carrying the Elnapress
Always close and lock the Elnapress before moving
it. Grasp the fixed handle to carry.
13
To Next Page
Loading...