22
Pleated skirt
Pleats : ironing board
Slip the skirt over the board. Arrange the pleats. Press.
Pleats may need to be pinned to the ironing board cover. Do not
use plastic head pins.
Jacket
To touch up a jacket or blazer follow the same procedure as with
a shirt.
Sleeves without creases :
Fold the sleeve on the seam line and place the seam line flat on
the board. Allow the top edge of the sleeve to hang off the edge
of the board. Press.
Lapels : ironing board
Place lapels flat, diagonally on the ironing board. Press. Smaller
lapels may be pressed using the ironing cushion.
Note : You may wish to use mini pressure allowing the heat to
smooth out areas that are only lightly wrinkled. Use the cushion
to iron parts that may be difficult to reach like shoulders. The
Elnapress will not leave shiny marks on the fabric.
Touching up
To Next Page
Loading...