Opening and closing
the press
Slide the safety lock to the right to unlock.
Always use both handles when opening and closing
the Elnapress.
With your left hand, use the fixed handle to raise
and lower the heating shoe. (Operating the press
this way keeps your hand from accidentally touching
the heating shoe while pressing.)
With your right hand, lower the movable handle and
apply ironing pressure. Raise the movable handle to
release ironing pressure. With your left hand, gently
raise the heating shoe to open the press.
Power supply
The specification plate (located under the base) indi-
cates the voltage of the ironing press.
Make sure this voltage corresponds to the voltage
you are using.
Connect the mains lead by pushing the plug firmly
into the socket.
Note : The Elnapress has a grounded plug and must
be connected to a grounded wall socket only. See
IMPORTANT SAFETY INSTRUCTIONS.
8
To Next Page
Loading...