27
Applications & Embellishments
Fusible patches
Measure the patch area and cut the patch larger than the area
measured. Place the patch on the garment. See the manufacturer’s
directions for fusing time.
Interfacing
Cut the interfacing without seam allowances and trim away any
corners. Place the interfacing adhesive side down onto the wrong
side of the fabric. See the manufacturer’s directions for fusing time.
Press, using a pressing cloth.
Rhinestones, iron-on transfers
Follow the heating time recommended by the manufacturer. If the
heating time exceeds 10 seconds, raise the movable handle as
soon as the buzzer sounds. Lower it again for another 10 second
cycle.
To Next Page
Loading...