20
Cuffs : ironing board
Place the cuffs and plackets around the edges of the ironing board.
Arrange any pleats. Press.
Sleeves : ironing board
Place the garment to the left side of the press with the collar towards
you. Place the first sleeve on the ironing board with the curve of the
garment fitted to the curve of the board (the second sleeve will lay
in front of the press off the board). Press. Remove first sleeve and
place second sleeve on board. Press.
Body : ironing board
Put the sleeves together and fold the shirt in half. Place it at the
back of the ironing board, extending the sleeves behind the board
on the right. Bring the shirt front with the buttons forward first. With
your right hand, hold the collar so that the curved edge of the neck
opening is flat against the ironing board. Do not release the collar
until you have lowered the heating shoe. Press.
Keep pulling the shirt forward until you have worked the whole
way around.
To Next Page
Loading...