User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 11 of 51
+12V Power USB Port (Green)
1. Expansion Module
The expansion module is an optional kit for X-Series touchcomputer. It is mounted to the center
of the system back cover as a peripheral port for all X-Series system.
2. Serial Port (RS-232)
The serial port is a standard native RS-232 interface for connection.
3. Ethernet LAN Port
The Ethernet LAN Port has gigabyte speed capability for network of the X-Series.
4. +12V Power USB Port
The +12V Power USB Port spec is design for Expansion Module only. The maximum power
rating of the +12V Power USB would be limited to 12V@2A specification.
5. Cash Drawer Port
The cash drawer port is a RJ-11 interface design and capable for +12V and +24V switchable
support. The default setting is at +24V and user can change the setting in system BIOS menu.
To Next Page
Loading...
